|
Specifications:
- Thickness
Material 0.4”(1/4”
Optional) to 5”
-
Width Material 0.6”
to 9”
-
Min length of material 7.9”
(Butt Fed)
- Feed
Speeds to 20-80 FPM (6-24
MPM)
-
Axial adjust. side heads 0.8”
(20mm)
-
Axial adjust. top/btm heads
0.8” (20mm)
- Net
weight approx. 5,800 lbs.
Main
Frame, Machine Bed & Enclosure:
- 1
Piece – Cast Iron Main
Frame.
- 78
inch (2 meter) long Adjustable
Straightening Infeed Table
and Fence (each adjustable
.4 inch)
- Tables
and Infeed fence are Hard
Chromed
- Lift
up sound and safety Enclosure
- Lubrication
to all main slides
Drive Includes:
- 6
Top Driven Feed Rolls
- Pneumatic
pressure(tension) to all top
feed rolls
- Intermediate
short stock top driven feed
roll station
- Rubber
top feed rolls after top head
- 4
HP Variable Speed Drive from
20-82 FPM
Spindle
Assemblies, Cutterheads &
Positioning:
- All
Heads are Standard 6000RPM,
40 mm diameter spindles
- Adjustment
of all spindles from front
– Easy to operate stations
- All
spindles have horizontal and
vertical adjustment, with
mechanical digital readouts
for fast and accurate setting,
except 1st bottom head which
has vertical only.
| STD.
HP |
|
-
2 & 3) Right Side/Left
Side Heads 15 HP
|
|
- 5)
2nd Bottom Head (5 Head)
10 HP
|
Chipbreakers,
Fences & Holdowns/Holdovers,
etc.:
- Tables,
Bedplates, Chipbreakers and
Fences are Hard Chromed
- 1.25”
(32mm) high fences
- Sectional
Chip breakers before top heads
- Double
side pressure unit opposite
fence side head moving with
near side head
- Left
Side Head equipped with telescopic
bed plate
- Side
guide after near side head
moving with near side head
- Pad
pressure(Pressure Plates)
after top head with vertical
screw adjustment and mechanical
digital position readout
Miscellaneous
features and inclusions:
- Hand
pump bed lubrication system
- Greasing
of all critical points from
central location
- Safety
interlock at infeed to prevent
feeding oversized or double
feeding material
- Dust
hoods
Electrical:
- I.E.C.
– Telemecanique-Square
D Electrics meet or exceed
UL/CSA Standards
- Machines
are equipped with Wye-Delta
Soft Starters, main disconnect,
multiple E Stops and 230/3/60
electrics.
- Condition:
Good
- Full
width Driven bottom infeed
roll - Spiral Fluted
- SIKO
Dual Mechanical Digital Readouts
with tool compensation device
in lieu of standard single
counters, Included on Near
Side and 1 Top
|
