USED - ONLY A COUPLE OF MONTHS

FEATURES:

• Heavy Fabricated Steel Frame
• C/W dust trough, complete internal wiring and all other components necessary to an operating machine
• Upper Infeed & Outfeed Rolls are adjusted by a single handwheel with jack screws, providing quick adjustment when changing panel thickness. Each shaft also has fine vertical adjustment on each end
• Panel Alignment Adjustment - Each Feed Roll adjusts fore & aft on each end to control the amount of lead, or angle towards the guide rail
• Feed System - pinch wheel shaft
• (2) Two pairs of Infeed powered pinch wheel shafts, adjustable vertically and fore and aft; wheels are 6" Dia. polyurethane covered, driven through a size 60 chain and sprocket system
• Feed System - pressure wheel shaft; Located ahead of cutting area powered hold-down wheel shaft, adjustable vertically and fore and aft; wheels 6" Dia. polyurethane covered; driven through a size 60 chain and sprocket system
• Infeed holdover fence included
• Safety photo-eye shut off along each side
• Anti-kickback assembly on infeed table
• Arbor is end supported, vertically adjustable, jam nut locking style

TOOLING INCLUDED:

• 24 Carbide Saw Blades, 12" Dia. carbide tipped, solid plate to locate between spacers
• Assorted aluminum spacers, machine to locate blades
• 24 Dado Heads

Condition: Very Good - Only used a couple of months

LISTING # : RG MC21-2-245643