• Wheel Construction of one piece high tensile 50,000 lbs/in.sq. cast iron. Wheels are statically and dynamically balanced through weight pockets built into the inside of the rim
• 7-1/4" "Wheel Face for 8" Wide Saws
• Top Wheel with hub ounted double row spherical self aligning roller bearings with extremely high load rating
• Top Shaft non-rotating massive alloy stell with eccentric ends which are carried in heavy-duty self-aligning bearings for strain purposes
• Bottom Wheel Shaft, short massive alloy, mounted in Timken-Catridge Type 'AP' tapered roller railroad car bearings. Live shaft used in order to facilitate easy belt maintenance. Deflectio of shaft avoided through shear mass of shaft.
• All shafts Alloy Steel with ground bearing seats
• Hand operated Top Wheel Tilt & Lift
• Heavy Cast Construction Base and Column
• With the Eccentric Shaft Ends (pivots) and Air Strain System incorporated, the machine provides an extremely fast, responsive strain system
• Strain Set through dial control
• A Large Compression Spring provides an initial 3000lbs of strain, enabling keeping the saw on the wheels
• Feed works Tilit up to 15 degrees
• Feed works through Extra Heavy Duty Roll Feed System featuring 4 only 5-1/2" Diameter, ball bearing mounted with individual adjustment to aligning with the saw
• Infinitely Variable Speed Hydaulic Drive System speeds 50-250 FPM
• Remote operator control station having feed control dial and foward, stop and jog reverse push button
• Feedworks easily changed from Center-Sawing to Gauge-Sawing (Linebar-Type Feeding) Each pair of feed rolls yield 6" or a total of 12" when center sawing. Max. Yield 12" outside and 6" inside or 18" total when Gauge Sawing

SPECIFICATIONS:
Max. depth of cut: 20"
Wheels: 54" diameter; 7-1/4" side for 8" W blade
Saws: 17-21 gauge (under most conditions) 8" W x 26' L
Main motor: 50 HP, or more recommended
WR2: 6,230 lbs/ft.sq. (for 8" blade)
Weight (approx.): 9,500 lbs
Electrics: 460/3/60

INCLUDED OPTIONS & FEATURES:

• Pressure Guides, specially built to get the as close as possible to the work being cut to ensure max. rigidity through the cut
• Bandsaw Cleaning and Lubricating Device at back of machine provides lubrication to inside of blade and elminates pitch buildup on blade and wheel faces. It also keeps flutter of blade at rear of machine to a minimum
• Resaw Style, Manual Type Steel Wheel Guard
• 60 HP Motor and Drive consisting of 1750 RPM, TEFC Motor, Adjustable Motor Base, Motor SHeave, Driven Sheave, Matched V Belts and Steel Belt Guard

MACHINE HISTORY:
Condition: Fairly Good
Serial No: 54-1479
Listing#: RE MCD 54RF-1-090110