:: Used Machinery
 

Used LEADERMAC LMC733-HU+ HYPERMAC 7-Head Moulder

 

Click to Enlarge Image

 

 

Features:

  • 1 Piece – Extra Heavy 1 piece Main Frame. With Cellular construction & Specially heat treated for maximum stability and minimum vibration
  • 58” (1.5 meter) long Adjustable Infeed Table and Fence (each adjustable .4 inch)
  • All Bedplates, Tables and Fences are Hard Chromed (except 1st bottom receiving plate which is alloy steel specially hardened for best wear ability)
  • Lift up sound & safety Enclosure including safety interlocks & good lighting inside the enclosure
  • Condition: LIKE NEW!
Specifications:  
Thickness Material to 6”
Width Material to 13”
Min length 7.9” (Butt Fed)
Net weight approximately 22,000 lbs.

 

HEAD HP SWING
1st Btm 15HP 4.9” to 7.1” (125 – 180 mm)
Right Side 15HP 4.4” to 9.1” (112 – 250 mm)
Left Side 15HP 4.4” to 9.8” (112 – 250 mm)
1st Top 40HP 3.9” to 9.8” (100 – 250 mm)
2nd Top 40HP 3.9” to 9.8” (100 – 250 mm)
2nd Bottom 30HP 3.9” to 9.8” (100 – 250 mm)
Universal 15HP 3.9” to 8.8” (100 – 225 mm)
  • Horse Powers can be changed, please discuss your requirements

Drive Includes

  • Powered rise and fall to extra heavy duty feed support beam by 2hp/1.5 kw motors.
  • Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for the best, most rigid upper beam support.
  • 10 Top Driven Feed Rolls
  • All Top Rolls are air tensioned with 3 Stage Pressure Setting of Feed Rolls.
  • Top infeed rolls before first bottom head with pneumatic rise and fall by switch.
  • Intermediate top driven feed roll station by rear side head with pneumatic loading for feeding minimum 8” (200mm) length workpieces. Flip up for rear side head removal.
  • 5 Driven Bottom Rolls – all full width
  • 1 more smooth Midfeed full width idling bed roll
  • 1st bottom infeed roll is Serrated & Driven along with 5 other smooth power driven bed rolls.
  • Bottom rolls have quick up/down adjustment by cam type lift system
  • Infinitely variable feed speeds with inverter (VFD) and feed speed LED display 20 – 150 FPM (6 – 45 m/min)
  • Feed motor power 15 hp
  • Inch forward and reverse to feed with duplicate control at top head position for fast easy setting

Spindle Assemblies, Cutterheads & Positioning:

  • 1 13/16” diameter spindles standard
  • Spindles are manufactured with 2 pairs of RHP –NSK ABEC 7 Duplex precision high speed Bearings. Spindle Tolerance is guaranteed to +/-0.002mm / 0.00007” accuracy.
  • Precision Hydro-Loc Outboard Bearings for all horizontal heads included
  • REC-705B Quik-TrueSet Electronic Top Head(s) Set System - with Head Radius and Size Input with Dual Electronic Digital Readout on front of machine showing head radius and head position
  • REC-705B Quik-TrueSet Electronic Near Side Head Set System - with Head Radius & Size Input
  • Adjustment of all spindles from front – Easy to operate station
  • Vertical Spindle – Axial (Vert.) Adjustment – 3.2”
  • Horizontal Spindle – Axial (Horiz.) Adjustment – 1.6”
  • Independent manual vertical adjustment to top head, top chip breaker and pressure plate.
  • 1st bottom head supplied with spiral carbide insert knife cutterhead
  • 1 Set (of 5) 4 Knife – 12/20° CA Cutterheads Included, serrated back

Chipbreakers, Fences & Holdowns/Holdovers, Etc.:

  • Chipbreakers are High Frequency Hardened and then Hard Chromed for long life
  • Pneumatically Loaded Double side pressure unit opposite fence side head moving with near side head
  • Chipbreaker assemblies before first and second top head with twin cylinder pneumatic loading
  • Pad Pressures (Pressure Plates) after first head with pneumatic loading and both pressure plates are equipped with mechanical digital position readouts.
  • Std. Digital (DRO’s) Counters included on Top Head Chipbreakers and Pressure Plates.
  • Automatic bed lubrication system with timer control
  • Centralized lubrication system to all main slides

Electrical:

  • TECO-Westinghouse or Siemens – Electric Motors – excellent quality & heavy duty
  • Limit switch at infeed to prevent feeding oversized material and double ups
  • I.E.C. – Telemecanique-Square D Electrics meet or exceed UL/CSA Standards
  • Machine equipped with Wye-Delta Soft-Start Starters, main disconnect, multiple E Stops and 460/3/60 electrics. (can be transformed to 230 or 575 volts easily and inexpensively)

Options Included:

  • Universal Last Head Position - new style with 2 hoods and extra bedplates, etc. and 360 degree rotation (in lieu of Standard last head
  • Increased Feed Speeds to 150 fpm (45 mpm) includes 10 Hp VFD Drive and LED Speed Readout
  • Axial Adjustment of last Bottom Head position from front of the moulder w/digital position readout
  • 2.4”(60mm) high fences after fence side head in lieu of standard 1.2”(32mm)
  • Stand Alone Operators Console for easier safer access to the buttons C/W – 15’ of cable
  • 2 only Highest Precision Straight Jointers including stem extensions & with Air over Oil Feed for smoothest feed and Auto Index of stone. Installed on 2nd top and 2nd bottom head position.
  • Note - other jointers can be added, see options section.
  • 2 part (Split) Sectional Pad Pressures (Pressure Plates) after top head with 2 separate pressures and fine adjustment to the outside shoe in lieu of single pressure plate
  • Electronic DC Brakes Baldor (Made in the USA) for the Cutterhead Spindle Assemblies

Additional Options Available- please request information/pricing:

You can outfit any additional head Top(s), Bottom(s) or Sides with Straight and/or Profile Jointers Highest Precision Straight Jointers including stem extensions

Note - with Air over Oil Feed for smoothest feed and Auto Index of stone

Pneumatically operated in-place Cartridge type Profile Jointers

Note - with Pneumatic Feed and Auto Index of stone, also including precision cartridge – jointing stone Setup Device

1 Only LMC MOU200600X29 Cutterhead Setting Stand for Measuring Radial Diameter before and after grinding, to determine change in radial diameter. The dimensions obtained can be used to set the dual mechanical digital readout on the moulder

 

Tell Me More

Name:
Company:
Phone:
Email:
 
 

 

 
PMB# 104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835