:: Leadermac Urethane Feed Rolls
 
Urethane Covered Standard Moulder Feed Rolls
140mm (5.5") OD X 2" - Aluminum Hub Rolls
35mm Bore w/Keyway Durometer
LMC PRHUB140285A35 Green with Super Additive 85A
LMC PRHUB140290A35Blue 90
LMC PRHUB140280A35Orange 80
LMC PRHUB140295A35Red 95
LMC 0433 (Made by Leadermac) 90
     
50mm Bore w/Keyway
Durometer
LMC PRHUB140285A50 Green with Super Additive 85A
LMC PRHUB140290A50Blue 90
LMC PRHUB140280A50Orange 80
LMC PRHUB140295A50Red 95
     
Recovering Charges - (Frt. In & Frt out extra)
Durometer
LMC PR140285ARC Green with Super Additive 85A
LMC PR140290ARC Blue 90
LMC PR140280ARC Orange 80
LMC PR140295ARC Red 85
   
205mm (8.1") OD & 210mm (8.25") - Steel Hub Rolls
205mm (8") O.D. x 2" x 50mm Bore
Durometer
LMC PRHUB205285A Green with Super Additive 85A
LMC PRHUB205290A Blue 90
LMC PRHUB205295A Red 95
     
Recovering Charges - (Frt. In & Frt out extra)
Durometer
LMC PR205285ARC Green with Super Additive 85A
LMC PR205290ARC Blue 90
LMC PR205295ARC Red 95
     
210mm (8") O.D. x 2" x 50mm Bore - Keyed
Durometer
LMC PRHUB210285A Green with Super Additive 85A
LMC PRHUB210290A Blue 90
LMC PRHUB210295A Red 95
     
Recovering Charges - (Frt. In & Frt out extra)
Durometer
LMC PR205285ARC Green with Super Additive 85A
LMC PR205290ARC Blue 90
LMC PR205295ARC Red 95
 
GREEN 85A Super Additive - Moulder rollers demanding ultra high performance, exhibiting exceptional wear while maintenance a positive footprint
 
ADVANTAGES OF SUPER ADDITIVE MATERIAL:
1. 15% drop in energy usage due to 85% less co friction factor
2. Operates using down pressure (operator using 85/one hundred pounds) can reduce until proper in-feeding is achieved
3. 3 - 4 times longer wear over standard rollers allowing OD to maintain original size for best production.
BLUE 90A - Moulder infeed and holddown rollers, slightly softer (Very Good for MDF)
ORANGE 80A - Moulder pull out rollers, increase tensile strength with an elogated footprint (Usually only used on Hardwoods & MDF)
RED 95A - Good feed table rolls, harsh moulder infeed (rough material) applications requiring high resiliance and abrasion resistance
 
 

 
 
PMB# 104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835