|
|
| |
|
| |
| ::
THUNDERMAC Series Moulder |
| |
-
1 to 10 Heads & optional Universal Head
or Rip Attachment
-
Width Capacity – 9”235mm) or
12”(305mm)
-
Thickness Capacity – 6”(150mm)
or 8”(205mm)
-
Feed Speeds to 260fpm(80mpm), 320fpm(100mpm),
390fpm(120mpm), 490fpm(150mpm) or 600fpm(185mpm)
|
|
|
The power and precision for world-class
production quality |
The
THUNDERMAC Series with a capacity
to 9”(235mm) or 12”(305mm)
width is designed for Heavy Duty High-Capacity,
highest quality operation for large
and small batch production runs with
Feed Speeds to 260fpm(80mpm) to 600fpm(185mpm).
The Super Quality heavy-duty Spindles
are dynamically balanced and run on
premium housing bearings, for superior
work-piece finish quality.
The THUNDERMAC provides perfect surface
quality, eliminating the need for
sanding on planed and profiled surfaces.
Width and thickness setting controller
is supplied as standard, lowering
downtime and increasing efficiency.
|
| |
|
Outstanding features: |
- Full
Sound & Safety Enclosure
- 1
piece, extra heavy machine frame is
heat treated for max. stability &
rigidity
- Extra
Heavy Feed Beam supported at each
end of the beam on 2 large supporting
columns and 1 further column in the
center
- Feed
System is Chainless Full HD Cardan
Shaft with very heavy gearboxes and
universals
- H.D.
Infeed System with 8” (200mm)
Dia Top Feed Rolls
- Pneumatic
pressure of the Top Feed Rolls can
be easily set to provide an the best
feed roll pressure.
- Pneumatic
Pressure to Side Head Holdover Rolls
as well as the Top Head Chipbreaker(s)
- Super
Precision Spindle Assemblies ea. incl.
4 Super-Precision + outboard Bearings
for highest tolerances
- Spindles
Speeds are std. 6,000 rpm and 7,200rpm/8,000
rpm or infinitely variable are optional
- Hydro-Loc
Outboards for horizontal spindle support
- Each
spindle is driven by an individual
motor
- REC
Setworks - Programmable controller
provides convenient thickness &
width of cut settings.
- More
Powered Top & Full Width Bottom
Rolls then most of our competition
- Exclusive,
separate adjustment of the vertical
spindles and the support tables allow
the support tables to be positioned
extremely close to the side cutterheads
to provide added cutting stability.
- Hard-Chrome
Plating Table Surfaces, Chip Breakers,
Pressure Plates & Man Guide for
max. wear resistance.
- Counters
for position all Cutterhead axis,
Chip Breakers and Pressure Plates
- Automatic
Table Lube System included
- Central
lubrication system
- Stand
alone operators console
- Electrics
to UL/CSA Standards and are 230/460
or 575/3/60
|
| |
|
Some options that are available: |
- 13”
Width and/or 8” Thickness
- Feed
Speeds from 260 fpm(80m/min) to 600
fpm(185m/min)
- Special
Configurations available on Request
-
- Smartset
PLC Control System with Touch Screen
for downloading desired set positions
directly to the machine
- Smartset-Advanced
Touch Screen Moulder Control System
– Maintain all history files,
downloads info from the grinding room,
triple electronic position readouts
for each axis, precision sets, troubleshooting,
etc.
- Precision
Auto Straight &/or profile jointers
- Angling
Side Head Spindle(s)
- Universal
Head or Rip Attachment is optional
- CE
Specifications and 380 or 415/3/50
electrics also available
|
| |
|
Standard Machine Specifications |
| Working
Width |
0.8" ~ 9” or 12”
(20~235mm or 305mm) |
| Working
Thickness |
0.39"~6"
or 8” (10~150mm or 200mm) |
| Number
of spindles |
1
~ 10 |
| Motor
capacity per spindle |
15HP
to 60HP |
| Feed
motor (VFD Controlled) |
20HP
~ 50HP |
| Spindle
Speed |
6000,
7200 or 8000 RPM |
| Spindle
diameter |
1
13/16”, 40mm, 50mm or 2 1/8” |
|
Feed speed, infinitely variable |
260,
320, 390 , 490 or 600 FPM |
| Length
of the infeed table |
32”
(.8m) or 55” (1.4m) |
|
| |
|
| |
| |
|
|
| Pneumatic
controls easily accessible
for control of feed rolls,
chip breakers, pressure
plates, hold-overs. |
|
|
Std.
HD 3/2 – 8”
Top Roll Infeed drive with
heavy pneumatic hold over
and anti double up gate.
Clutch Roll as 1st Top Roll
|
|
| |
|
|
|
|
|
|
| All
types of machine configurations
are available. This machine
is Bottom, and Top before
the side heads which is
an excellent choice for
rough material infeed at
high speeds |
|
|
| Side
Head Section with HD Pneumatic
Side Head Roll Holdover
System ahead of it |
|
| |
|
|
|
|
|
| Optional
profile jointer(shown) and
/or straight jointer on side
and top/bottom heads |
|
|
Top
& Bottom Head Hydro-loc
Outboard Bearing assemblies.
Note pneumatically locked
top head outboard supports
and floating pressure plate
over last bottom head |
|
| |
|
|
 |
|
 |
| Remote
Pedestal Control with REC
Near Side and Top Head Setworks
Controls Std. on Thundermac |
|
|
Optional
Smartset Advanced PLC Control
with Touch Screen for full
setworks system and downloaded
information and control from
the grinding room.
Also includes history and
huge information library |
|
| |
|
|
|
|
|
|
Heavy
Duty Cardan Shaft Drive and
with over sized gearboxes
gear boxes
TECO-Westinghouse Motors |
|
|
| Optional
opposed side heads |
|
| |
|
|
|
|
|
|
| Optional
opposed side heads |
|
|
| Greasing
to all critical points from
2 or 3 centralized locations. |
|
| |
|
|
|
|
| |
|
|
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
