|
|
| |
|
| |
| ::
SPEEDMAC Series Moulder |
| |
|
| |
- 1
to 11 Heads & optional Universal Head
or Rip Attachment
- Width
Capacity - 9”(230mm), 10.2”(260mm), 12"(305mm), 13"(330mm) or 15"(380mm)
- Thickness
Capacity – 6”(150mm), 8”(205mm) or 10”(255mm)
-
Feed Speeds to 200fpm (60mpm) or 300fpm
(90mpm)
|
|
The Power and Precision for World-Class Production
Quality |
The Speedmac
Series is designed for high-capacity, highly
accurate operation for large and small batch
production runs. The heavy-duty spindles
are dynamically balanced and run on premium
housing bearings, for superior work-piece
finish quality.
The Speedmac
provides perfect surface quality, eliminating
the need for sanding on planed and profiled
surfaces. Width and thickness setting controller
is supplied as standard, lowering downtime
and increasing efficiency.
|
| |
|
OUTSTANDING FEATURES: |
- Full Sound
& Safety Enclosure
- 1 piece,
Cast Iron Machine Frame is heat treated
for max. stability & rigidity for std.
configurations.
- Extra Heavy
Feed Beam supported at each end of the beam
on 2 large supporting columns
- Feed System
is Chainless Full HD Cardan Shaft with very
heavy gearboxes and universals
- H.D. Infeed
System with 8” (200mm) Dia Rolls
- Infinitely Variable - Faster Feed
Speeds of up to 200 fpm(60m/min) are standard
and to 300 fpm(90m/min) are optional.
- Sectional Pneumatic
Pressure of the Top Feed Rolls can be easily
set to provide the best feed roll pressures.
- Pneumatic
Pressure to Side Head Holdover Rolls as
well as the Top Head Chipbreaker(s)
- Super Precision
Spindle Assemblies ea. incl. multiple Super-Precision
+ outboard Bearings for highest runout tolerances - hence better finish
- Spindles
Speeds are std. 6,000 rpm and 7,200rpm/8,000
rpm are optional
- Hydro-Loc
Outboards for horizontal spindle support
- Each spindle
is belt driven by an individual HD motor
- REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Botom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in Separate Section)
- More Powered
Top & Full Width Bottom Rolls then most
of our competition
- Exclusive,
separate adjustment of the vertical (Side Head) spindles
and the support tables allow the support
tables to be positioned extremely close
to the side cutterheads to provide added
cutting stability.
- Extra Heavy Hard-Chrome
Plating Table Surfaces, Chip Breakers, Pressure
Plates & Man Guide for max. wear resistance.
- Counters for position all Cutterhead axis, Chip Breakers
and Pressure Plates
- Automatic
Pneumatic HD Large Tank Capacity Table Lube System included
- Central Easy Access Grease Lubrication
systems
- Stand alone
Operators Console
- Electrics
to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 if required
|
| |
|
Some of the Many Options that are available: |
- Special Machine & Head Layout & opposite Handed Configurations available on Request:
- SmartSet 100 - Operator Touch Screen Controls to load desired sizes ad download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position. (See SmartSet Separate Section)
- SmartSet-300 & 400 Touch Screen Moulder Control System –
Maintain all history files, downloads info
to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. (See SmartSet Separate Section)
- Precision
Auto Straight &/or Profile Jointers
- Tilting Chip Breakers, Pressure Plates and/or Feed
Beam
- Angling Side
Head Spindle(s)
- Grooved Beds for very Short Stock Feeding
- Universal
Head or Rip Attachment is optional
- Remote Hand
held Pendant control
- CE Specifications
and 380 or 415/3/50 electrics also available
|
| |
|
Standard Machine Specifications |
| Working
Width |
0.78"
~ 9”, 10.2”, 12", 13" or 15"
(20~230mm, 260mm, 305mm, 330mm or 380mm) |
| Working
Thickness |
.39"-6",
8” or 10”
(10~150mm, 200mm or 250mm) |
| Number
of spindles |
1 ~ 11 |
| Motor capacity
per spindle |
15HP to
50HP |
| Feed motor
(VFD Controlled) |
15HP –
20HP |
| Spindle
Speed |
6000, 7200
or 8000 RPM |
| Spindle
diameter |
1 13/16”,
2 1/8”, 40mm or 50mm |
| Feed speed,
infinitely variable |
To 200 fpm
(60m/min) or 300 fpm(90mpm) is optional.
|
| Length
of the infeed table |
32”(.8m),
55”(1.4m), 78.7" (2m); 98”
(2.5m) or 120” (3m) |
|
| |
| |
Speed
up your moulding operations with the latest
technology
breakthroughs from LEADERMAC |
| |
|
|
|
| |
|
|
|
| |
| Pneumatic
Controls & Pressure Gauges easily accessible for
Pressure control of feed rolls, chip breakers,
pressure plates, hold-overs. |
|
|
| Std.
HD 2/2 – 8” Top Roll
Infeed drive, including 1st roll
clutch roll with heavy pneumatic
hold over and anti double up gate |
|
| |
|
|
|
| |
|
|
|
| |
| Side
Head Section with Pneumatic Holdover & Chipbreaker Ass'y & Side
Head Jointer(s) |
|
|
| Optional
profile jointer(shown) and /or
straight jointer on side head |
|
| |
|
|
|
| |
|
|
|
| |
Pneumatic
Daul Top Head Chip Breakers
Close coupled feed rolls top &
bottom |
|
|
|
Top & Bottom Head Hydro-loc
Outboard Bearing assemblies for
wider machines and jointed machines |
|
| |
|
|
|
| |
 |
|
 |
| |
| Std. Remote
Pedestal Mounted Control with REC Near
Side and Top Head Setworks Controls.
Standard on Maximac. |
|
|
Optional
SmartSet 100, 200, 300 or 400 PLC Touch Screen Control for full setworks system
and downloaded information and control
from the grinding room(SS400). Also includes
history and huge information library
See Separate Section which explains different SmartSet Control Systems |
|
| |
|
|
|
| |
|
|
 |
| |
Heavy
Duty Cardan Shaft Drive and with
over sized gearboxes gear boxes
TECO-Westinghouse Motors |
|
|
| Optional
opposed side heads (often used for Flooring application, etc..) |
|
| |
|
|
|
| |
|
|
|
| |
| Color Coded Greasing
to all critical points from 2 or
3 centralized locations |
|
|
Top Head Automatic Straight Jointer |
| |
|
|
|
|
|
| |
| |
|
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
