|
|
| |
|
| |
| ::
SMARTMAC Series Moulders |
| |
-
1 to 5 Heads & optional Universal
Head
-
7”
(180mm) or 9”(230mm) Width
|
|
|
Powerful, Precise, Efficient & Economical
Moulder. |
- Full Sound
& Safety Enclosure includes lighting
fixtures.
- One-piece,
cast iron heavy machine frame is specially
heat treated for standard configurations.
- Motorized
vertical adjustment of feed beam
- More Full
Width Top & Bottom Driven Rolls then
most competitors
- Feed System
is Chainless Heavy Duty Cardan Shaft with
very heavy gearboxes and universals
- Fast variable
feed speeds of up to 78 fpm (24mpm) are
standard – higher speeds optional
- Precision
Spindle Assemblies each include 4 Precision
Bearings for high tolerances
- Spindles
Speeds are std. 6,000 rpm and 7,200 rpm
are optional
- Adjustment
of each spindle can be easily performed
using front adjustments.
- Each Horizontal
spindle is driven by an individual motor
& Side Heads share a common motor
- Pneumatic
pressure of feed rollers can be easily set
to assist smooth feeding. Separate controls
for top Infeed, Midfeed & Outfeed Rolls.
- Hard-Chrome
Plating throughout all Table Surfaces, Chip
Breakers, Pressure Plates and Main Guide.
- Dual Digital
Counters on Near Side Head & Top Head
Radial set & Mechanical Digital Readouts
for all heads Axial and Radial, the pressure
plates & Top Head Chip Breaker
- 1 Shot Table
Lube System
- Central lubrication
system - lubrication points located from
front of machine.
- Complete
set of cutter heads
- Electrics
to UL/CSA Standards and are 230/460 or 575/3/60
or 380/415/3/50 as desired – can convert
to single phase optional
|
| |
|
Some options that are available: |
- Auto Bed
Lube
- REC Setworks
Programmable controller for convenient thickness
and or width of cut settings.(optional)
- Universal
Head (optional)
- Pneumatic
Pressure to Top Head chip Breakers &/or
Side Head Holdover Rolls
- To CE Standards
if desired
|
| |
|
A wide range of spindle configurations
–1 to 5 Heads available
These represent only a few of the more
common configurations |
 |
|
| |
|
Standard Machine Specifications |
| Working
Width |
0.78"-7”,
8" or 9.1" |
| Working
Thickness |
10~125mm
(.39"~ 5"); 0.25” optional |
| Number
of spindles |
1 to 5 |
| Motor capacity
per spindle |
5HP ~ 15HP |
| Spindle
Speed |
6000 RPM
(7200 rpm optional) |
| Spindle
diameter |
1 13/16”,
40mm (1.6"), 1 ½” or
50mm |
| Feed speed,
infinitely variable |
6~24 m/min
(19.5~78 FPM) |
| Adjustment
range: infeed table and edge-jointing
fence |
10mm (0.4") |
| Length
of the straightening table |
78”
(2m), 98” (2m) or 120” (2.5m) |
|
| |
| |
|
|
|
| |
| Pneumatic
controls allowing individual setting
for infeed, midfeed, and outfeed
rolls, and controls for pneumatic
side head hold over and pneumatic
chipbreakers. |
|
|
| Centrally
located lubrication point to all
critical points |
|
| |
|
|
|
| |
|
|
|
| |
| Control
panel, variable feed control,
infeed table with adjustments,
infeed hold over roll, and manual
lubricator |
|
|
| Anti
double up gate, Pneumatic side
pressure unit opposite fence side
head, short stock roll position
in down position (flips up out
of the way for easy access to
side head) |
|
| |
|
|
|
| |
|
|
|
| |
| Pneumatic
Chip Breakers on top head. Multiple
Top powered feed Rolls and 2 Full
width powered Bottom Feed rolls |
|
|
| Dual
mechanical readouts for quick set
up on top and near side head |
|
| |
|
|
|
| |
 |
|
 |
| |
| Cardan
shaft drive, showing very heavy
duty gear boxes, universal joints,
and TECO-Westinghouse Motors. |
|
|
| Smartmac
Precision spindle with 4 Precision
ABEC 6 bearings ensuring accuracy
and longevity. |
|
| |
|
|
|
|
|
| |
|
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
