|
|
| |
|
| |
| ::
Set-Up Stands |
| |
| 
Set-Up
Stands
|
|
|
-
Supports up to 15” (380mm)
diameter cutters, & 15”
(380mm) long - axial measure
– 400 lbs. max.
-
Outfitted with HD Slide Base
so heads can be crane lifted
into unit and then slid into
position for measuring
-
15 inch integrated Hi Resolution
LCD Flat Screen with fine resolution
cross hairs (providing Excellent
Visual of knives and grind)
-
20x magnification CCD Colour
Camera
-
Axial & Radial Information
download capability to PC
-
RS232 output (intended for ProTool
software use).
-
Serial printer interface is
built-in.
-
Dual Display provides simultaneous
readings of axial and radial
positions, can calculate arc
length, arc radius, and arc
center points. The display also
supports Tool Measurement Mode,
where the operator can select
specific measurement points
for printing directly to a label.
• Supports 120-240 VAC
input.
-
Heavy Duty floor stand - table
is optional
-
Cutterhead Arbor is extra
|
| Options
available |
|
 |
-
ProTool Software –
a cutting tool calibration
& cataloguing software
package. For Windows. Provides
tooling measurement &
cataloguing info including
Material, location, machine
use, frequency and amount
of grinding, operator &
Purchasing details –
all to assist with quick
moulder setup and to provide
management with valued information
- computer required for
Protool Software activation
#901-7200-001
|
- Label
Printer – prints measurement
data sticky label to apply
to the cutterheads
#905-5000-001
|
- HD
Floor Stand Table 24”
x 36”
#905-3500-001
|
- Precision
Cutterhead Arbor (advise
dia.)
|
|
| |
|
Pro Scale
ABS Model 150 systems are
general purpose absolute digital
measuring systems. They come with
a Scale, Readhead (w.3m cable),
Standard Digital Display, Connector
Link and Manual.
|
 |
| ProScale
ABS |
Part
Number |
Measuring
Range |
| Model
150-10 |
ACC
901-1510-010 |
(10")
250 mm |
| Model
150-18 |
ACC
901-1515-010 |
(18")
450 mm |
|
| |
 |
Leadermac
Precision Cutterhead Setting &
Measuring Stand
for determining Radial Diameter
before and after grinding, to determine
change in radial diameter. The dimensions
obtained can be used to set the
dual mechanical digital readout
on the moulder
| Part
# |
For
Heads with Bore of: |
| LMC
RMF-1-1/2 |
1-1/2" |
| LMC
RMF-40 |
40
MM |
| LMC
RMF-1-13/16 |
1-13/16" |
| LMC
RMF-50 |
50
MM |
| LMC
RMF-2-1/8 |
2-1/8" |
9"
and 12" Models also Available |
| |
|
| |
|
| |
|
|
| |
|
| |
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
