|
|
| |
|
| |
| ::
PLATINUM Series Moulder |
| |
- 1 to 9 Heads
& optional Universal Head or Rip Attachment
-
- Width Capacity
- 9”(230mm), 10.2”(260mm), 12”(305mm)
or 13”(330mm)
- Thickness
Capacity – 6”(150mm), 8”(205mm)
or 10”(255mm)
|
| |
|
|
 OUTSTANDING
FEATURES: |
- Full Sound &
Safety Enclosure.
- One-piece, cast iron
machine frame
- Extra Heavy Feed
Beam supported at each end of the beam on 2 large
supporting columns(at each end) and includes Motorized
vertical adjustment of feed beam
- Feed System is Full
HD Cardan Shaft with very heavy gearboxes and universals
- More Powered Top
& Full Width Bottom Rolls then most of our competition
- Feed speeds of up
to 100 fpm (30mpm) are standard.
- Pneumatic pressure
of the Top Feed Rolls can be easily set to provide
an the best feed roll pressure. Separate Pressure
controls for top Infeed, Midfeed & Outfeed Rolls
- Pneumatic Pressure
– easily adjusted to Side Head Holdover Rolls
as well as the Top Head Chipbreaker(s)
- Precision Spindle
Assemblies each including 4 Precision ABEC 7 Bearings
for highest tolerances
- Spindles Speeds are
std. 7,200 rpm and 8,000 rpm is optional
- Adjustment of each
spindle can be easily performed using the front
adjustment control.
- Each spindle is driven
by an individual motor for powerful machining and
easy control.
- Hard-Chrome Plating
(approx. 008” thickness) Table Surfaces, Chip
Breakers, Pressure Plates and Main Guide for maximum
wear resistance.
- Dual Digital Counters
on Near Side Head & Top Head(s) Radial Set &
Digital Readouts for all heads Axial and Radial
as well as counters on Chip Breakers & Pressure
Plate(s).
- Automatic Table Lube
System included
- Central lubrication
system - lubrication points located from front of
machine.
- Electrics to UL/CSA
Standards and are 230/460 or 575/3/60 – can
convert to single phase optional
|
| |
|
Some options that are available: |
- 10.2”, 12”
or 13” Width and/or 8” or 10”
Thickness
- REC Setworks Programmable
controller for convenient thickness and or width
of cut settings.(optional)
- Quik Axial Set of
4” (100mm) adjustment to the side heads –
so that you can stack heads on top of each other
for quick pattern changes
- Hydro-Loc Outboards
for horizontal spindle support on wider machines
- Grooved Beds for
very Short Stock Feeding
- Universal Head or
Rip Attachment is optional
- CE Specifications
and 380 or 415/3/50 electrics also available
|
| |
|
Standard Machine Specifications |
| Working
Width |
0.78"~9.1”
10.2", 12" or 13" (20-230mm, 160mm,
300mm or 330mm) |
| Working Thickness |
0.39"-6",
8” or 10” (10-150mm,200mm or 250mm) |
| Number of spindles |
1 - 9 |
| Motor capacity
per spindle |
7.5HP to 20HP |
| Feed motor |
5HP (standard) |
| Spindle Speed |
7200 or 8000 RPM |
| Spindle diameter
|
1 13/16”,
40mm(1.6"), or 50mm |
| Feed speed, infinitely
variable |
19.5~100 FPM (6-30
m/min) |
| Adjustment range:
infeed table & edge-jointing fence |
0.4" (10mm) |
| Length of the infeed
table |
78.7" (2m);
98” (2.5m) or 120” (3m) |
|
| |
| |
|
|
|
| |
| Pneumatic
controls allowing individual setting for
infeed, midfeed, and outfeed rolls, and
controls for pneumatic side head hold
over and pneumatic chipbreakers. |
|
|
| Centrally
located lubrication point to all critical
points |
|
| |
|
|
|
| |
|
|
|
| |
| Control
panel, variable feed control, infeed table
with adjustments, infeed hold over roll,
and automatic lubricator |
|
|
| Anti double-up
gate, Pneumatic side pressure unit opposite
fence side head, short stock roll position
in down position (flips up out of the
way for easy access to side head) |
|
| |
|
|
|
| |
|
|
|
| |
| Pneumatic
Chip Breakers on top heads. Close coupling
and multiple powered top feed rolls and
full width powered bottom feed rolls. |
|
|
| Dual
mechanical readouts (electronic optional)
for quick set up on top and near side head.
REC Setworks available for Near side and
Top head quick setting. |
|
| |
|
|
|
| |
 |
|
 |
| |
| Cardan shaft
drive, showing very heavy duty gear boxes,
universal joints, and TECO-Westinghouse
Motors. |
|
|
| Cutaway of
Compact Precision spindle with 4 Precision
ABEC 7 bearings ensuring accuracy and longevity. |
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
| Optional
REC Setworks controls installed on near
side head and two top heads for fast and
easy set up. |
|
|
| Optional
Axial set system for servo setting of vertical
positioning of side heads with 100mm (4")
of movement for stacking side heads. |
|
| |
|
|
|
|
|
| |
| |
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
