|
|
| |
|
| |
| ::
MAXIMAC Series Moulder |
- 1
to 10 Heads & optional Universal Head
or Rip Attachment
- Width
Capacity - 12”(305mm) or 13”(330mm)
- Thickness
Capacity – 6”(150mm), 8”(205mm)
or 10”(255mm)
- Feed
Speeds to 150fpm, 200fpm or 300fpm
|
|
The power and precision for world-class production
quality |
The MAXIMAC
Series with a capacity to 12”(305mm)
or 13”(330mm) width is designed for
Heavy Duty High-Capacity, highest quality
operation for large and small batch production
runs with
Feed Speeds to 150fpm(45mpm), 200fpm(60mpm)
or 300fpm(90mpm).
The Super Quality heavy-duty Spindles are
dynamically balanced and run on premium
housing bearings, for superior work-piece
finish quality.
The Maximac provides perfect surface quality,
eliminating the need for sanding on planed
and profiled surfaces. Width and thickness
setting controller is supplied as standard,
lowering downtime and increasing efficiency.
|
| |
|
Outstanding features |
- Full Sound
& Safety Enclosure
- 1 piece,
cast iron machine frame is heat treated
for max. stability & rigidity for std.
configurations.
- Extra Heavy
Feed Beam supported at each end of the beam
on 2 large supporting columns
- Feed System
is Chainless Full HD Cardan Shaft with very
heavy gearboxes and universals
- H.D. Infeed
System with 3 Top 8” (200mm) Dia Rolls
& 2 Bottom rolls
- Faster feed
speeds of up to 150 fpm (45m/min) are standard
and to 200 fpm(60m/min) or 300 fpm(90m/min)
are optional.
- Pneumatic
pressure of the Top Feed Rolls can be easily
set to provide an the best feed roll pressure.
- Pneumatic
Pressure to Side Head Holdover Rolls as
well as the Top Head Chipbreaker(s)
- Super Precision
Spindle Assemblies ea. incl. 4 Super-Precision
+ outboard Bearings for highest tolerances
- Spindles
Speeds are std. 6,000 rpm and 7,200rpm/8,000
rpm or infinitely variable are optional
- Hydro-Loc
Outboards for horizontal spindle support
- Each spindle
is driven by an individual motor
- REC Setworks
- Programmable controller provides convenient
thickness & width of cut settings.
- More Powered
Top & Full Width Bottom Rolls then most
of our competition
- Exclusive,
separate adjustment of the vertical spindles
and the support tables allow the support
tables to be positioned extremely close
to the side cutterheads to provide added
cutting stability.
- Hard-Chrome
Plating Table Surfaces, Chip Breakers, Pressure
Plates & Man Guide for max. wear resistance.
- Counters
for position all Cutterhead axis, Chip Breakers
and Pressure Plates
- Automatic
Table Lube System included
- Central
lubrication system
- Stand alone
operators console
- Electrics
to UL/CSA Standards and are 230/460 or 575/3/60
|
| |
|
Some options that are available: |
- 13”
Width and/or 8” or 10” Thickness
- Feed Speeds
to 200 fpm(60m/min) or 300 fpm(90m/min)
- Special
Configurations available on Request -
- Smartset
PLC Control System with Touch Screen for
downloading desired set positions directly
to the machine
- Smartset-Advanced
Touch Screen Moulder Control System –
Maintain all history files, downloads info
from the grinding room, triple electronic
position readouts for each axis, precision
sets, troubleshooting, etc.
- Precision
Auto Straight &/or profile jointers
- Angling
Side Head Spindle(s)
- Grooved
Beds for very Short Stock Feeding
- Universal
Head or Rip Attachment is optional
- Remote Hand
held Pendant control
- CE Specifications
and 380 or 415/3/50 electrics also available
|
| |
|
Standard Machine Specifications |
| Working
Width |
.78"-
12” or 13”
(20-300mm or 330mm) |
| Working
Thickness |
.39"-6",
8” or 10” (10-150mm,200mm
or 250mm) |
| Number
of spindles |
1 - 10 |
| Motor capacity
per spindle |
7.5HP to
50HP |
| Feed motor
(VFD Controlled) |
15HP –
25HP |
| Spindle
Speed |
6000, 7200
or 8000 RPM |
| Spindle
diameter |
1 13/16”,
40mm, 50mm or 2 1/8” |
| Feed speed,
infinitely variable |
19.5-150
fpm(45m/min), 200 fpm (60m/min) or 300
fpm(90mpm) are optional. |
| Length
of the infeed table |
32”(.8m),
55”(1.4m), 78.7" (2m); 98”
(2.5m) or 120” (3m) |
|
| |
| |
|
|
|
| |
| Pneumatic
controls easily accessible for
control of feed rolls, chip breakers,
pressure plates, hold-overs. |
|
|
Std.
HD 3/2 – 8” Top Roll
Infeed drive with heavy pneumatic
hold over and anti double up gate.
Clutch Roll as 1st Top Roll if
200 or 300 FPM |
|
| |
|
|
|
| |
|
|
|
| |
| All
types of machine configurations
are available. This machine is
Bottom, and Top before the side
heads which is an excellent choice
for rough material infeed at high
speeds |
|
|
| Side
Head Section with Pneumatic Side
Head Jointer |
|
| |
|
|
|
| |
|
|
|
| |
| Optional
profile jointer(shown) and /or straight
jointer on side head |
|
|
Top
& Bottom Head Hydro-loc Outboard
Bearing assemblies.
Note pneumatically locked top head
outboard supports and floating pressure
plate over last bottom head |
|
| |
|
|
|
| |
 |
|
 |
| |
| Remote
Pedestal Control with Std. REC Near
Side and Top Head Setworks Controls.
Standard on Maximac. |
|
|
| Optional
Smartset Advanced PLC Control with
Touch Screen for full setworks system
and downloaded information and control
from the grinding room. Also includes
history and huge information library |
|
| |
|
|
|
| |
|
|
 |
| |
Heavy
Duty Cardan Shaft Drive and with
over sized gearboxes gear boxes
TECO-Westinghouse Motors |
|
|
| Optional
opposed side heads |
|
| |
|
|
|
| |
|
|
|
| |
| Greasing
to all critical points from 2 or
3 centralized locations |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
