The HYPERMAC is a Very Heavy Duty Unjointed or Jointed Moulder
with Quick-Change options included & others available

• 1 to 10 Heads & optional Universal Head or Rip Attachment
• Width Capacity - 9”(230mm), 10.2”(260mm), 12”(305mm) or 13”(330mm)
• Thickness Capacity – 6”(150mm), 8”(205mm) or 10”(255mm)

• Full Sound & Safety Enclosure with internal lighting system .
• One-piece, cast iron machine frame is specially heat treated for standard configurations.
• Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns.
• Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
• Faster feed speeds of up to 120 fpm (40m/min) are standard and to 150 fpm(45m/min) or 200 fpm(60m/min) are optional.
• Pneumatic pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
• Pneumatic Pressure – easily adjusted to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s)
• Precision Spindle Assemblies each including 4 Precision Bearings ABEC 7 for highest tolerances
• Spindles Speeds are std. 6,000 rpm and 7,200rpm/8,000 rpm are optional
• Adjustment of each spindle can be easily performed using the front adjustment control.
• Each spindle is driven by an individual motor for powerful machining and easy control.
• REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition
• Exclusive, separate adjustment of the vertical spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability.
• Hard-Chrome Plating to all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance.
• Dual Digital Counters on Near Side Head & Top Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s).
• Automatic Table Lube System included
• Central lubrication system - lubrication points located from front of machine.
• Electrics to UL/CSA Standards and are 230/460 or 575/3/60 – con convert to single phase optional

• 10.2”, 12” or 13” Width and/or 8” or 10” Thickness
• Feed Speeds to 150 fpm(45m/min) or 200 fpm(60m/min)
• Special Configurations available on Request:
• Smartset – Operator touch screen to load desired sizes and download to the machine
• which is equipped with Dual Electronic Digital Readouts – Top Desired position and bottom actual set position
• Smartset Advanced - Touch Screen Moulder Control System – Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc.
• H.D. 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding
• Quik Axial Set of 4” (100mm) adjustment to the side heads – so that you can stack heads on top of each other for quick pattern changes
• Hydro-Loc Outboards for horizontal spindle support on high speed & wider machines
• Precision Auto Straight &/or profile jointers
• Tilting Top Beam, Chipbreakers &/or Pressure Plate
• Angling Side Head Spindle(s)
• Grooved Beds for very Short Stock Feeding
• Universal Head or Rip Attachment is optional
• Stand alone operators console &/or remote Hand held Pendant control
• CE Specifications and 380 or 415/3/50 electrics also available