|
|
| |
|
| |
| ::
HYPERMAC + Series Moulder |
| |
|
| |
- 1
to 11 Heads
-
Width Capacity - 9”(230mm), 10.2”(260mm),
12”(305mm) or 13”(330mm) or 15.75" (400mm)
-
Thickness Capacity – 6”(150mm),
8”(205mm) or 10”(255mm)
|
 |
 The Power and Precision for World-Class Production Quality |
| The Hypermac+ Series is designed for high-capacity, highly accurate operation for large and small batch production runs. The heavy-duty spindles are dynamically balanced and run on premium housing bearings, for superior work-piece finish quality. |
|
OUTSTANDING FEATURES: |
- Full Sound
& Safety Enclosure
- (1) One piece,
Cast Iron Machine Frame is heat treated for Max. stability & rigidity for std. configurations
- Extra Heavy
Feed Beam supported at each end of the beam
on 2 large supporting columns
- Feed System
is Chainless Full HD Cardan Shaft with very
heavy gearboxes and universals
- H.D. Infeed System with 8" (200mm) Diameter Rolls
- Infinitely Variable - Faster Feed Speeds of up to 120fpm(35mpm), 150fpm(45mpm) or 200fpm(60mpm) are optaional
- Sectional Pneumatic
Pressure of the Top Feed Rolls can be easily
set to provide the best feed roll pressure.
Separate Pressure controls for top Infeed,
Midfeed & Outfeed Rolls
- Pneumatic
Pressure to the Side
Head Holdover Rolls as well as the Top Head
Chipbreaker(s)
- Super Precision
Spindle Assemblies each include Multiple Super-Precision + outboard Bearings for highest runout tolerances - hence better finish
- Spindles
Speeds are std. 6,000 rpm and 7,200rpm/8,000
rpm are optional
- Hydro-Loc Outboards for horizontal spindle support
- Each spindle is belt driven by an individual HD motor
- REC Setworks - Programmable controller provides convenient thickness & width of cut settings or SmartSet 100 Touch Screen Controls are std.
- More Powered Top & Full Width Bottom Rolls then most of our competition
- Exclusive, separate adjustment of the vertical (Side Head) spindles and the support tables allow the support tables to be poisitioned extremely close to the side cutterheads to provide added cutting stability
- Extra heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Man Guide for max. wear resistance
- Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
- Automatic Pneumatic HD Large Tank Cpacity Table Lube System included
- Central Easy Access Grease Lubrication Sysytems
- Stand alone Operators Console
- Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 if required
|
| |
|
Some of the Many Options that are available: |
- Feed Speeds to 150 or 200 fpm ( 45 or 60mpm)
- Special Machine & Head Layout & opposite Handed Configurations available on Request
- SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is euipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position (See SmartSet Separate Section)
- SmarSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. (See SmartSet Separate Section)
- H.D. 2/1 & 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding
- Precision Auto Straight &/or Profile Jointers
- Tilting Chipbreakers, Pressure Plates and/or Feed Beam
- Angling Side
Head Spindle(s)
- Grooved Beds for very Short Stock Feeding
- Universal
Head or Rip Attachment is optional
- Remote Hand held
Pendant control
- CE Specifications
and 380 or 415/3/50 electrics also available
|
| |
|
Standard Machine Specifications |
| Working
Width |
0.78"~9.”
10.2", 12", 13" or 15.75"
(20-230mm,
260mm, 305mm , 330mm, or 380mm) |
| Working
Thickness |
0.39"-6",
8” or 10”
(10-150mm, 200mm
or 250mm) |
| Number
of spindles |
1 - 11 |
| Motor
capacity per spindle |
15HP to
40HP |
| Feed
motor (VFD Controlled) |
15HP ~
20 HP |
| Spindle
Speed |
6000, 7200
or 8000 RPM |
| Spindle
diameter |
1 13/16”,
2 1/8", 40mm or 50mm |
|
Feed speed, infinitely variable |
to 150 or 200 FPM ( 45 or 60mpm) are optional. |
| Length
of the infeed table |
32”(0.8m),
55”(1.4m), 78.7" (2m); 98”
(2.5m) or 120” (3m) |
|
| Speed up your moulding operations with the latest technology breakthroughs from LEADERMAC |
| |
| |
|
|
|
| |
| Pneumatic Controls & Pressure Gauges easily accessible for Pressure control of feed rolls, chip breakers, pressure plates, hold-overs |
|
|
| Std. HD 2/2 - 8" Top Roll Infeed drive, including 1st roll clutch roll with heavy pneumatic hold over and anti double up gate |
|
| |
|
|
|
| |
|
|
|
| |
| Side Head Section with Pneumatic Holdover & Chipbreaker Ass'y & Side Head Jointer(s) |
|
|
| Optional profile jointer (shown) and/or straight jointer on side head |
|
| |
|
|
|
| |
|
|
|
| |
Pneumatic Dual Top Head Chip Breakers
Close coupled feed rolls top & bottom
|
|
|
|
Top & Bottom Head Hydro-loc
Outboard Bearing assemblies for
wider machines and jointed machines |
|
| |
|
|
|
| |
 |
|
 |
| |
| Std,, Remote
Pedestal Mounted Control with REC Near Side and Top Head Setworks Controls. Standard on Maximac |
|
|
|
| |
|
|
|
| |
|
|
 |
| |
Heavy
Duty Cardan Shaft Drive and with
over sized gearboxes gear boxes
TECO-Westinghouse Motors |
|
|
| Optional
opposed side heads (often used for Flooring application, etc.) |
|
| |
|
|
|
| |
|
|
|
| |
| Color Coded Greasing to all critical points from 2 or 3 centralized locations |
|
|
| Top Head Automatic Straight Jointer |
|
| |
|
|
|
|
|
| |
| |
|
|
|
| |
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835 |
|
