::THUNDERMAC SERIES MOULDER
strichel_horistrichel_vert strichel_vert
strichel_hori
strichel_hori
 
  The power and precision for world-class production quality
  The Thundermac series is designed for high-capacity, highly accurate operation for large and small batch production runs. The heavy-duty spindles are dynamically balanced and run on premium housing bearings, for superior workpiece finish quality.

The Thundermac provides perfect surface quality, eliminating the need for sanding on planed and profiled surfaces. Width and thickness setting controller is supplied as standard, lowering downtime and increasing efficiency.
 

Speed up your moulding operations with the latest technological breakthroughs from LEADERMAC
  • CENTRALIZED LUBRICATION POINTS
  Greasing to all critical parts is conveniently made by the centralized arrangement of lubrication points.
  • HEAVY DUTY GEARBOX & MOTOR
  The feed rollers are driven through a combination of universal shafts and gearbox, ensuring no loss of power transmission. A smooth feeding effect is assured. A Heavy duty gearbox has no backlash and provides powerful and accurate feeding performance.
  • HEAVY-DUTY INDEPENDENT PRESSURE PAD
  The sturdy and robust pressure pad is located above the bottom spindle, and is mounted to the machine body. This design reduces vibration and increases operation stability. The pad elevation is electronically controlled.
  • PROGRAMMABLE CONTROLLER
  The width & thickness setting can be easily set using the programmable controller. The desired values for width and thickness can be conveniently pre-set and are displayed on an LED. The speed is inverter controlled.
  • CONVENIENT SPINDLE ADJUSTMENT
  Adjustment of all spindles is easily effected from the front. The adjustment points are all at the same height, for more convenient and faster adjustment.
  • FEED SYSTEM
  The bottom infeed roller works in conjunction with a limit switch to stop the machine if workpiece is too thick.
  • FULLY AUTOMATIC FEEDING SYSTEM (Optional)
  When the system detects the chain feed of the workpiece, the hydraulic feed system will pneumatically lower and activate to feed the workpiece into the machine. This provides constant and stable feed, reducing labor requirements and decreasing cycle time.
  • DESIGNED FOR PARAMOUNT STABILITY
  Powerful, heavy-duty pneumatic side and pressure shoes for the left spindle provide extremely stable pressure for high-speed operations. A top pressure roller in front of the right vertical spindle ensures constant stock feed.
 
  • POWERED INFEED ROLLER
  The smooth initial feeding of the stock is achieved by means of the independently powered infeed rollers.
  • SELF ACTUATING FIRST FEED ROLLER
  The first feed roller is powered, but when in high speed feeding the roller will run freely, eliminating potential damage to the workpiece and machine. This allows for smooth operation with exceptionally high feed speeds.
   

 



  • FEED PRESSURE SYSTEM
  Side and top pressure system for workpiece feed provides efficient and error-free processing.
For all your wookworking applications

Choice of machine models,
from Speedmac LMC-623 (6-spindle) to LMC-1023 (10-spindle).

OUTSTANDING FEATURES:
 
  • All moulders awarded CE certification.
  • Faster feed speeds of up to 80 meters a minute are standard.
  • Programmable controller provides convenient thickness & width of cut settings
    Adjustment of each spindle can be easily performed using the front adjustment level.
  • Exclusive, separate adjustment of the vertical spindles and the feeding table allows the feeding table to be positioned extremely close to the cutterhead to provide added cutting stability.
  • The full safety enclosure serves as a chip guard and helps to reduce noise.
  • Each spindle is driven by an individual motor for powerful moulding and easy control.
  • Multiple pneumatic pressure of the feed rollers can be easily set to provide an outstanding feeding effect.
  • Table surface is hard-chrome plated for maximum wear resistance.
  • All manually adjusted turning parts are housed in dry bearings for oil-free lubrication.
  • Automatic lubricator is provided to supply oil to the feeding table.
  • One-piece, cast iron machine frame is specially heat treated for maximum stability and rigidity by standard configuration.
  • The powered outfeed rollers provide stable and smooth workpiece outfeed even for especially thin or smooth materials. The rollers remain perfectly parallel even after long-term use.
  • Mechanical digital readouts for all head and pressure elements & the pressure elements of top spindle.
  • Sectional Chip Breaker Assembly in front of top spindle.
  • Motorized vertical adjustment of the top spindle including PC digital readouts.
  • Finest Alloy Steel Spindles and housings with 2 sets of Ultra Precision Duplex Bearings in each spindle. All are permancently grease lubricated.
  • Built in Straight & Profile jointers provide accurae operation with high quality finish.
  • The full safety enclosure serves as a chip guard and helps reduce noise.
• PROGRAM SYSTEM
(Optional)
  The program computer system allows for the programming and storing of 24 sets of dimensions. When the desired dimensions are entered, the left and top spindles automatically move the corresponding position. This system eliminates the need for trial runs.
• Duel Electric Digital Readout (Optional)
  Provides more efficient tool changing.
                              
A wide range of spindle configurations
STANDARD EQUIPMENT:  
• Working Width (at a tool cutting circle of 140mm) 20-230mm
(.78"-9.1")
• Working height (at a tool cutting circle of 163mm) 10-150mm
(.39"-6")
• Number of spindles, min-max
 5-10
• Motor capacity per spindle 17.5 KW / 20HP
• Spindle speed 6,000RPM -std. Spindle speed 6000 RPM -std.
• Spindle diameter 50mm - std. 113/16" or 21/8" optional
• Head cutting circle, first bottom spindle, min-max 160-260mm
(6.3"-10.25")
• Head cutting circle, vertical spindles, left, min-max
 160-260mm
(6.3"-10.25")
• Head cutting circle, vertical spindles, right, min-max 160-260mm
(6.3"-10.25")
• Head cutting circle, horizontal spindles, top, min-max
 160-260mm
(6.3"-10.25")
• Head cutting circle, horizontal spindles, 2nd/3rd bottom,
   min-max		 160-260mm
(6.3"-10.25")
• Standard Feed motor
 11KW/15HP
• Feed speed, infinitely variable by frequency driven motor 8-80 m/min
(26-260 fpm)
• Feed roller diameter
 200mm(8")
• Feed roller width 2 x 50mm(2")
• Pneumatic pressure for feed rollers, max
 6 bar (87psi)
• Adjustment range for infeed table and edge-jointing fence 10mm(.4")
• Adjustment range of vertical spindles (axial)
 80mm(3.2")
• Adjustment range of horizontal spindles (axial) 20mm(7.9")
• Length of the straightening (moulder infeed) table 0.8M(31.5")
• Chainless extra heavy duty Cardan drive feed system  
• Mechanical digital readouts for the cutterhead spindles,
   pressure shoes & chip breakers		  
• Full sound and safety enclosure  
• Motorized vertical adjustment of feed
  
• Lateral pneumatic pressure roller opposite first right spindle  
• Program system provides faster setting.  
• Diameter of dust hood for vertaical spindle Ø200mm(7.9")
• Diameter of dust hood for horizontal spindle Ø200mm(7.9")
OPTIONAL EQUIPMENT:
 
  • Universal spindle assembly, head cutting circle min 100mm(4"),max 200mm(8")
  • Setting and measuring devices
  • Feed speeds of 100, 120 or 150 m/min(325, 400 or 500 fpm)
  • Length of infeed table 2, 2.5 or 3 meters(78",98"or 118")
  • Maximum working thickness 200 mm(8")
  • Maximum width up to 260mm(10.2"),300mm(11.8")is available
  • CE specifications
  • Increased motor horsepower available
  • Straight jointer(s)
  • Profile jointer(s)-cartridge type

Tell Me More
Name:
Company:
Phone:
Email: