Width Capacity – to 6’ (150mm),
9”(230mm) or 12”(305mm)
Thickness
Capacity – to 4”(100mm)
Special Machine designed to plane the top
and bottom surfaces and prepare the sides
for the best edge gluing surfaces using special
'pre-gluing milling device' which ensures
perfect glued surface grip.
Full safety
enclosure serves as a chip guard and helps
to reduce noise.
Feed speeds
up to 80fpm (24 meters) a minute are standard.
Adjustment
of each spindle can be easily performed
from front of machine.
Each spindle
is driven by an individual motor for powerful
milling and easy control
Pneumatic
pressure of the feed rollers can be easily
set to provide an smooth feeding effect.
Table surfaces,
main guide and chip breakers are hard-chrome
plated for maximum wear resistance.
•
Unique
Pre-gluing Milling Device
Two
sides are prepared for gluing
with 1 head with side milling
cutters. This ensures that
glued surfaces join properly.
•
Pneumatic Roller Pressure
Compensates
for large variances in work
piece thicknesses. Ensures
smooth and stable feeding
of work pieces of different
thicknesses.
•
Feedmac 04 – Short Block
Lateral Feeder
Provides
automatic work piece feeding
for improved efficiency. Ideal
for fast feeding of short work
pieces.
•
Hydraulic Hopper Feeder
Provides
automatic work piece feeding
for improved efficiency also
ideal for fast feeding of short
work pieces.
A wide range of spindle configurations
Standard Machine Specificatons:
Working Width (at a tool cutting circle
of 140mm)
0.6"~6"
(15-150mm)
Working
height (at a tool cutting circle of
163mm)
0.4"~4"
(10-100mm)
Number
of spindles, min-max
4-9
Standard
motor capacity per spindle
7.5 HP
to 20HP (5 KW to 15kw)
Spindle
speed
6000
or 7200 RPM
Spindle
diameter
40mm
or 1 13/16”
Head
cutting cicle
to 7.1”
(180mm)
Feed
motor - std.
5HP (3kw)
Feed
speed, infinitely variable by frequency
driven motor
20-80fpm
(6-24 m/min)
Adjustment
range for infeed table and edge jointing
fence
10mm
(.4”)
Length
of infeed table - std. - other optional
1.4M
(55”)
Optional Equipment
To 8”
(200mm), 10” (250mm) or 12”
(300mm) Working width.
Program
Setworks system providing faster setting
Setting
and measuring devices
Increased
horsepower
Automatic
lubrication for feeding table.
CE specifications
and 380/415/3/50 electrics if desired
Lateral
Feed or Hopper Feed Systems
PMB#
104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835
Special Machine designed to plane the top
and bottom surfaces and prepare the sides
for the best edge gluing surfaces using special
'pre-gluing milling device' which ensures
perfect glued surface grip.
