:: COMPACT Series Moulder
 
  • 1 to 9 Heads & optional Universal Head or Rip Attachment
  • Width Capacity - 9”(230mm), 10.2”(260mm), 12”(305mm) or 13”(330mm)
  • Thickness Capacity – 6”(150mm), 8”(205mm) or 10”(255mm)
OUTSTANDING FEATURES:
  • Full Sound & Safety Enclosure
  • One-piece, cast iron machine frame is specially heat treated for std. configurations.
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large support columns
  • Feed System is a Heavy Duty Cardan Shaft with very heavy gearboxes and universals
  • More Powered Top & Full Width Bottom Rolls then most of our competition
  • Pneumatic pressure of the Top Feed Rolls can be easily set
  • Pneumatic Pressure to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s)
  • Precision Spindle Assemblies each including 4 Precision Bearings for highest tolerances
  • Spindles Speeds are std. 6,000 rpm and 7,200 rpm is optional
  • Each spindle is driven by an individual motor
  • Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates and Main Guide
  • Dual Digital Counters on Near Side Head & Top Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s).
  • Automatic Table Lube System included
  • Central lubrication system
  • Complete set of cutter heads
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 – con convert to single phase optional
  • Some Options that are available
 
Some options that are available:
  • 10.2”, 12” or 13” Width and/or 8” or 10” Thickness
  • REC Setworks Programmable controller for convenient thickness and or width of cut settings.(optional)
  • Hydro-Loc Outboards for horizontal spindle support on wider machines
  • Grooved Beds for very Short Stock Feeding
  • Universal Head or Rip Attachment is optional
  • CE Specifications and 380 or 415/3/50 electrics also available
 
Standard Machine Specifications 
Working Width 0.78"~9.1” 10.2", 12" or 13" (20-230mm, 160mm, 300mm or 330mm)
Working Thickness 0.39"-6", 8” or 10”; 1/4” opt. (10-150mm,200mm or 250mm)
Number of spindles 1 - 9
Motor capacity per spindle 7.5HP to 20HP
Feed motor 5HP (standard)
Spindle Speed 6000 or 7200 RPM
Spindle diameter 1 13/16”, 40mm(1.6"), 1 ½” or 50mm
Feed speed, infinitely variable 85 FPM (25 m/min)
Length of the infeed table 78.7" (2m); 98” (2.5m) or 120” (3m)
 
 
 
 
Pneumatic controls allowing individual setting for infeed, midfeed, and outfeed rolls, and controls for pneumatic side head hold over and pneumatic chipbreakers.
 
Centrally located lubrication point to all critical points
 
 
 
 
 
Control panel, variable feed control, infeed table with adjustments, infeed hold over roll, and automatic lubricator
 
Anti double-up gate, Pneumatic side pressure unit opposite fence side head, short stock roll position in down position (flips up out of the way for easy access to side head)
 
 
 
 
 

Pneumatic Chip Breakers on top heads. Close coupling and multiple powered top feed rolls and full width powered bottom feed rolls.
 
Dual mechanical readouts (electronic optional) for quick set up on top and near side head. REC Setworks available for Near side and Top head quick setting.
       
   
 
Cardan shaft drive, showing very heavy duty gear boxes, universal joints, and TECO-Westinghouse Motors.
 
Cutaway of Compact Precision spindle with 4 Precision ABEC 6 bearings ensuring accuracy and longevity.
       

Tell Me More
Name:
Company:
Phone:
Email:
 
 

 
 
PMB# 104, 1124 Fir Avenue, Blaine, WA 98230 - Toll Free: 1.866.522.6835