| ::
LMC-418 7" 4-Head Four Sided Planer |
| |
|
SPECIFICATIONS |
- Thickness
Material .39” to 4”
- Width Material
.8” to 7.1”
- Feed Speeds
23 & 46 FPM (7 & 14 MPM)
|
| |
|
MAIN FRAME, MACHINE BED & ENCLOSURE |
- 1 Piece –
Heavy Steel Cellular Main Frame. Specially
heat treated for maximum stability and minimum
vibration
- 67 inch
(1.7 meter) long Adjustable Straightening
Infeed Table and Fence (each adjustable
.4 inch)
- Lift up
Sound and Safety Enclosure & safety
lock – with built in lighting
|
| |
|
DRIVE INCLUDES |
- Maintenance
free Full Cardan Shaft Drive to feedworks
for balanced drive performance, with individual
worm reduction gear box to each feed roller
station
-
Upper support Beam is supported on large
adjustable dovetail slide for best, most
rigid upper beam support.
-
Top Beam is manually adjustable height wise
-
All feed rolls and pressures move with top
beam rise and fall
-
5 (1 in front of Top Head and 1 Outfeed)
Top Driven Feed Rolls
-
Pneumatic pressure(tension) to all top feed
rolls with pressure regulator controls
-
Infeed driven serrated Steel feed rolls
up to top head are hardened to resist wear
and prevent chips and shavings from sticking
to them
-
Polyurethane top feed roll after top head
-
Feed roll diameter 4.7” / 120mm
-
2 HP Dual Speed Drive 23 & 46 fpm
|
| |
|
SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING |
- All Heads
are Standard 6000RPM (6800 rpm optional)and
belt driven
- 35 mm (1.38”)
diameter spindles
- Precision
Spindles are manufactured from SCM-440 tool
steel with special heat treating to HR 55C
Hardness fitted with precision high speed
Bearings to provide the best in cutting
stability with permanent accuracy. They
are permanent grease lubed and are sealed
and are impervious to dust and water.
- Edge reference
straightening system with carbide referencing
head
- Near Side
& Top Head Spindles have radial adjustment,
with mechanical digital readouts for fast
and accurate setting
- Independent
manual vertical adjustment to top head.
- Complete
set of Carbide Cutterheads supplied for
all heads for S4S
|
| |
|
STD. HP SWING |
- Bottom Head
/ Top Head 10 HP shared 4””
(100 mm)
- Right Side
/ Left Side Heads 10 HP shared 4”
(100 mm)
|
| |
|
CHIPBREAKERS, FENCES & HOLDOWNS/HOLDOVERS,
ETC. |
- Tables,
Bedplates and Fences are Hard Chromed
- 0.8”
(20mm) high fences
- HD Chip
breakers before top head with vertical screw
adjustment
- Double roller
side pressure unit opposite fence side head
moving with near side head
- Idling Holdown
Roll opposite rear side head
- Left Side
Head equipped with telescopic bed plate
|
| |
|
MISCELLANEOUS features and inclusions |
- Safety interlock
at infeed to prevent feeding oversized or
double feeding material
- Dust hoods
included with hosing to exit ports
- Toolkit
- Instruction
and maintenance manual, electrical diagram
and parts list
|
| |
|
ELECTRICAL |
- TECO-Westinghouse
– Electric Motors – excellent
quality & heavy duty
- Electrics
to UL/CSA Standards using Telemechanique
Switchgear w/emergency stop button; main
disconnect & with 230 or 575/3/60 electrics
- Machine
conforms to CSA/UL & CE specifications
|
| |
| Note
– Machine is intended to be a good S4S
machine with very limited moulding capability |
| |
|
| |
|
| |
