LEADERMAC

Speedmac Moulder Series

Features

  • 1 to 11 heads & optional Universal head or Rip Attachment
  • 9", 10.2", 12", 13" or 15" Width; 6", 8" or 10" Thickness Capacity
  • Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
  • Full Sound & Safety Enclosure
  • One-piece, Cast Iron Machine Frame is heat treated for ma. stability & rigidity for std. configurations
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
  • Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
  • H.D. Infeed System with 8" (200mm) Dia. Top Rolls
  • Sectional Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressures
  • Pneumatic Pressure to Side head Holdover Rolls as well as the Top Head Chipbreaker(s) + Side head Chipbreaker(s)
  • Super Precision Spindle Assemblies ea. incl. multiple Super-Precision + outboard Bearings for highest available runout tolerances - hence better finish
  • Spindles Speeds are Std. 6,000 RPM and 7,200/8,000RPM are optional
  • Hydro-Loc Outboards for Horizontal Spindle Support
  • Each spindle is belt driven by an individual HD Motor
  • REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Bottom Rolls then most of our competition. (See Optional SmarSet Controls listed below and (See Optional SmarSet Controls listed below and in Separate Section)
  • More Powered Top & Full Width Bottom Rolls then most of our competition
  • Exclusive, separate adjustment of the Vertical(Side Head) spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability
  • Extra Heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Main Guide for max. wear resistance
  • Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
  • Automatic Pneumatic HD Large Tank Capacity Table Lube System included
  • Central Easy Access Grease Lubrication systems
  • Stand alone Operators Console
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 or415/3/50 if required

AVAILABLE OPTIONS:

  • Special machine & Head Layout & opposite Handed Configurations available on Request
  • Feed Speeds to 300FPM(90m/min)  or 400FPM(120m/min)
  • SmartSet 100 - Operator Touch Screen Controls with 250Set Memory to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position also including Quick Open Reset.  
  • SmartSet-300 Touch Screen Moulder Control System – 1,000Set Memory - Maintain all history files, downloads info to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. also including Quick Open Reset.   
  • Precision Auto Straight &/or Profile Jointers
  • Tilting Chip Breakers, Pressure Plates and/or Feed Beam
  • Angling Side Head Spindle(s)
  • Grooved Beds for very short stock Feeding
  • Universal Head or Rip Attachment is optional
  • Remote Hand held Pendant control

STANDARD SPECIFICATIONS:

Working Width 0.78"/9", 10.2", 12", 13" or 15"
(20-230mm, 260mm, 305mm, 330mm or 380mm)
Working Thickness .39"-6", 8" or 10"
(10-150mm, 200mm or 250mm)
Number of Spindles 1-11
Motor capacity per spindle 15HP to 60HP
Feed motor (VFD Controlled) 15HP to 30HP
Spindle Speed 6000, 7200 or 8000 RPM
Spindle diameter 1-13/16", 2-1/8", 40mm or 50mm
Feed speed, infinitely variable to 300FPM(90mpm) is optional
Length of the Infeed table 32"(.8m), 55"(1.4m), 78.7"(2m); 98"(2.5m) or 120"(3m)

Images