LEADERMAC

Smartmac Moulder Series

Features

Powerful, Precise, Efficient & Economical Moulder.

  • 1 to 5 Head Moulder
  • 7" (180mm) or 9" (230mm) Width
  • Full Sound & Safety Enclosure includes lighting fixtures
  • 1 piece, cast iron heavy machine frame is specially heat treated for standard configurations
  • Motorized vertical adjustment of feed beam
  • More full width Top & Bottom Driven Rolls them most competitors
  • Feed System is Chainless Heavy Duty Cardan Shaft with very heavy gearboxes and universals
  • Fast variable feed speeds of up to 80 fpm (25mpm) are standard - higher speeds optional
  • Precision Spindle Assemblies each include 4 Precision Bearings for high tolerances
  • Spindles Speeds are std. 6000 rpm and 7200 rpm are optional
  • Each Horizontal spindle is driven by an individual motor & Side Heads share a common motor
  • Pneumatic pressure of feed rollers can be easily set to assist smooth feeding. Separate contrls for top Infeed, Midfeed & Outfeed Rolls
  • Hard-Chrome Plating throught all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide.
  • Dual Digital Counters On Near Side Head & Top Head Radial Set & Mechanical Digital Readouts for all heads Axial and Radial, the pressure plates & Top Head Chip Breaker
  • 1 Shot Table Lube System
  • Central lubrication system - lubrication points located from front of machine
  • Complete set of cutter heads
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/415/3/50 as desired- can convert to single phase optional

Some options that are available:

  • Auto Bed Lube
  • REC Setworks Programmable controller for convenient thickness and or width of cut settings (optional)
  • Universal Head (optional)
  • Pneumatic Pressure to Top Head Chip Breakers &.or Side Head Holdover Rolls
  • To CE Standards if desired

A wide range of spindle configurations -1 to 5 Heads available

These represent only a few of the more common configurations

Specifications:

Working width 0.78" - 7", 8" or 9.1"
Working thickness 10-125mm(.39" - 5"); 0.25" optional
Number of spindles 1 to 5
Motor capacity per spindle 5 HP - 15 HP
Spindle speed 6000 RPM (7200rpm optional)
Spindle diameter 1-13/15"; 40mm (1.6"), 1-1/2" or 50mm
Feed speed, infinitely variable 6-24m/min (19.5-78 FPM)
Adj. range: infeed table
and edge-jointing fence
10mm (0.4")
Length of the straightening table 78" (2m), 98" (2m) or 120" (2.5m)

Images