::PLANERMAC SERIES

Choice of machine models, from LMC-445 (4-spindle) ,LMC-545 (5-spindle) to LMC-645 (6-spindle). LMC-745 (7-spindle) to LMC-845 (8-spindle). Ideal for producing profiled strips for fingerjointing and sideboard drawer applications.   Programmable controller provides convenient width and depth of cut setting. The full safety enclosure serves as a chip guard and helps to reduce noise. Pneumatic pressure of the feed rollers can be easily set to provide an outstanding feeding effect. Table surface is hard-chrome plated for maximum wear resistance. One-piece, cast iron machine frame is specially heat treated for maximum stability and rigidity. Each spindle is driven by an individual motor for powerful moulding and easy control. The smooth initial feeding of stock is achieved by means of independently powered feed rollers.   With fine features to give you the winning edge in 4 side moulding   • Pneumatic Feeding Rollers The feed rollers are pneumatically loaded for excellent feeding effect. 3 stage, feed roller pressure setting.   • Pneumatic Control Pressure Rollers Specially designed 6 pneumatically controlled pressure rollers provided on the first bottom spindle assure maximum smoothness for work feeding and perfect surface bottom finish.   • ENLARGED OUTBOARD BEARING FOR CUTTERHEAD (OPTIONAL)   The first bottom cutterhead and final spindle are supported by additional hydro outboard bearings providing a solid support. The enlarged hydraulic bearing supports also provide convenient cutterhead change by pulling it out.   • Outboard Bearing for Cutterhead (Std.)   The first bottom and top cutterheads are supported by additional outboard bearings, providing a solid support.   • Centralized Control Panel   Width and depth of cut setting can be accurately and conveniently made through digital controllers on the control panel. STANDARD EQUIPMENT:   • Working Width (at a tool cutting circle of 140mm) 20-450mm • Working height (at a tool cutting circle of 163mm) 10-200mm • Number of spindles, min-max 4-8 • Basic motor capacity per spindle 11 KW / 15HP • Basic motor capacity of feed 11 KW / 15HP • Spindle speed 5500 RPM • Spindle diameter 50mm • Tool cutting circle, first bottom spindle, min-max 125-180mm • Tool cutting circle, vertical spindles, left, min-max 112-200mm • Tool cutting circle, vertical spindles, right, min-max 112-200mm • Tool cutting circle, horizontal spindles, top, min-max 100-200mm • Tool cutting circle, horizontal spindles, bottom, min-max 100-200mm • Feed motor 7.5HP • Feed speed, infinitely variable by frequency driven motor 6-24 m/min • Feed roller diameter 200mm • Feed roller width 4 x 50mm • Pneumatic pressure for feed rollers, max 6 bar (87psi) • Adjustment range for infeed table and edge-jointing fence 10mm • Adjustment range of vertical spindles (axial) 30mm • Adjustment range of horizontal spindles (axial) 20mm • Length of the straightening table 1.4M • Mechanical digital readouts for the pressure shoes & hold-down unit • Full sound and safety enclosure   • Motorized vertical adjustment of feed   • Lateral pressure roller opposite first right spindle   • Chainless cardan feed system   • Universal spindle, tool cutting circle min 100mm, max 200mm   • Program system provides faster setting.   OPTIONAL EQUIPMENT:   Setting and measuring devices Length of infeed table 2, 2.5 or 3 meters Increased horsepower Moulding width up to 500 mm, 600 mm is available Moulding thickness up to 200mm, 300mm are available CE specifications             Tell Me More Name: Company: Phone: Email: